LED_maDneSs
30-06-2009, 10:11 AM
As above,
Took them to be machined yesterday but then tried to fit my original nuts and found i'd have to buy new bolts to so can't be bothered with them anymore lol
They fit as they are to 2000 onwards Shogun and 2005 onwards (newer model released in 2005) L200, Make sure you have the flatish hub face.
They are in very good condition, wheels only slightly scuffed on 1, should buff out, tyres again plenty of meat on them, slightly run off on the inside but no issues,
Will have mitsubishi centre cap badges fitted for the sale,
Tyres are Toyo Proxes at 265/45/20 speed and load index: 108 V
PCD is 6x139 and the centre bore is currently 68mm
Prices for the machining were to mate the centre bores fit the older shogun/paj etc with bore of 108mm: £25 quid for setup and first piece, then £15 quid a wheel,
i.e £80 to make them fit the older models...
As new with these tyres, your looking at £1700, Design is RS UV-3
I can't sell them on ebay at the mo due to me sueing them for abusing their policys so there on the forums only lol
Buy for yourself or sell on ebay for a profet, I don't care :P
As I say, cutting my losses and selling on lol
£550 ono
Cheers
Ste
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7338.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7339.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7340.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7341.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7342.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7343.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7344.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7345.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7346.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7347.jpg
Took them to be machined yesterday but then tried to fit my original nuts and found i'd have to buy new bolts to so can't be bothered with them anymore lol
They fit as they are to 2000 onwards Shogun and 2005 onwards (newer model released in 2005) L200, Make sure you have the flatish hub face.
They are in very good condition, wheels only slightly scuffed on 1, should buff out, tyres again plenty of meat on them, slightly run off on the inside but no issues,
Will have mitsubishi centre cap badges fitted for the sale,
Tyres are Toyo Proxes at 265/45/20 speed and load index: 108 V
PCD is 6x139 and the centre bore is currently 68mm
Prices for the machining were to mate the centre bores fit the older shogun/paj etc with bore of 108mm: £25 quid for setup and first piece, then £15 quid a wheel,
i.e £80 to make them fit the older models...
As new with these tyres, your looking at £1700, Design is RS UV-3
I can't sell them on ebay at the mo due to me sueing them for abusing their policys so there on the forums only lol
Buy for yourself or sell on ebay for a profet, I don't care :P
As I say, cutting my losses and selling on lol
£550 ono
Cheers
Ste
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7338.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7339.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7340.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7341.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7342.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7343.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7344.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7345.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7346.jpg
http://i550.photobucket.com/albums/ii437/Sideways_Ste/20s%20for%20sale/DSC_7347.jpg