Underground RACE uk -SALES

[jimmy]

Underground Race UK suppliers of any Bosch or Bosch motorsport part.
Suppliers of Hotshot performance (USA ) parts (imported)-tel.-07768100219

http://www.cruisenorthwales.com/forum/inde...e=post&id=38830
http://www.dancharlton.co.uk/ZX_Clocks.jpg

Custom style dash dials available (with exception to Nissan Primera and Almera) in any combination of colours and style with or with out any logo , These are a printed Vinyl cover which is made to your own design requirments and applied over the top of the original dials. pictures show of A set done for an Almera (when they were available for it) and some in a sunny ZX coupe.
prices on these vary depending on car and level of customisation desired





[url=http://www.webspawner.com/users/undergroundrace/index.html]

[jimmy]

Call us on 07768100219

http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38811
Clear Honda civic rear clusters . The Honda civic clear rears are up for grabs priced £69 inc VAT
http://www.erebunicorp.com/images/autos2/civic710aR.jpg
P&P is extra (not including in any of the prices shown here )
They are for the models around P to about the T reg (i think)
http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38812
Side repeators i can get clear or smoked side repeators for most makes /models and prices vary . I can get std Nissan side repeators cheaper than dealers prices and also get Nismo clear side repeators (R34 Skyline ones) which also fit Almeras (with slight mod) and Primeras priced £50 inc VAT. (expensive i know but their genuine Nismo)

Also available Nissan Skyline GT-R badges as shown in the above pic £44.50 (GENUINE NISSAN ITEMS)

http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38816
Universal fit Tommy Kiara adjustable boot spioler , imported from Tokyo .
Would normally cost in excess of £300 to buy /import.
Comes primered (light grey) looks similar to a R34 Skyline spioler.
heres another pic of it:-
http://www.classmaz.pwp.blueyonder.co.uk/jimmy/6.JPG
My price as its already imported £150

[jimmy]

http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38821Quikshift biult 'blitz styled' stainless steel mesh air filters for increased power and excellent sounds/under bonnet looks!These Kits use extremely fine stainless steel mesh and mirror finish top and bottom plates. Each kit is supplied with brackets, hoses and fittings etc. Where required, as well as cold air feed pipe and full instructions. Huge power gains, superb looks and unique metallic sound like no other air filter. Over 100 kits available. Full range of universal cone filters in four sizes with many different collar diameters. Cone filters can also fit other types of induction kit by simply replacing the filter.
http://www.quikshiftracing.co.uk/Images/Products/Kit2.jpg
COLLAR SIZES - 60, 65, 67, 70, 72, 75, 80, 81.5, 85, 90, 96, 100, 110 & 160mm.
http://www.quikshiftracing.co.uk/Images/Products/x3SVi2.jpg
Below see a Quickshift filter used as an upgrade on a DC Sprts CAI equipped car,,,
http://www.quikshiftracing.co.uk/Images/Gallery/japauto2.jpg
http://www.motorsportworld.co.uk/quikshift/images/filters/svi2.jpg
Cheapest prices around.

Also available, universal stainless steel crankcase breather filters from Quickshift Racing .

[jimmy]

http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38818Kaminari Honda Accord boot spioler, again imported from tokyo.
Cost well over £300 usually to buy and import
another pic of it:-
http://www.classmaz.pwp.blueyonder.co.uk/jimmy/1.JPG
comes primered in white , and includes fitting kit and instructions plus the Kaminari badges for the sides of it.
http://www.classmaz.pwp.blueyonder.co.uk/jimmy/2.JPG
My price £185


http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38820
FSE power boost valves (performance adjustable fuel regulators) available for a host of cars shown in the pic is the Nissan ALMERA (n15) , THIS IS ALSO THE SAME ONE USED FOR THE Subaru Impreza WRX and the Sunny GTi-R . my price £96.50 inc VAT for these models , prices may vary for others.
http://demo.justwebs.co.uk/ShopPics/RUK/RH_LED.jpg
Replacment 'R' honda 'H' badges £14.25 inc VAT

http://www.grahamgoode.com/products/images/007879.jpg
Created by the famous Grahame goode racing , this is a complete bonnet skin with agressive vents to aid performance as well as looks, its double skined and comes unpainted -available for the Focus RS and possibly other versions of the ford focus RRP -£500 my price £465.20 !!!!
--------------------------------------------------------------------------
http://www.racelanduk.com/Admin/news/Pics/2111.jpg
Aluminium boot spioler , universal fitment .
Lightwieght. My price £105.95 inc VAT!!!

Mazda MX5 roadster (eunos ) Chromed sports look roll over bar
My price £110.25 inc VAT
http://www.racelanduk.com/Admin/news/Pics/1575.jpg
Universal polyurthane air filter fits direct on to the injection unit with an adaptor and comes with 6 different adaptor rings so fits BMW , VW and alfa romeos to give improved sound and performance.My price JUST £20.25!!!

Crankcase breather/air filter. Available in 9mm 12mm or 25mm kneck sizes . My price just £11.10 !!!!!
======
http://www.racelanduk.com/Images/Shop_front/struts.jpg
http://demo.justwebs.co.uk/ShopPics/RUK/TRR_PB_003.jpg
Pugeot 206 top strut brace RRP is £53 my price is jut £49.50 .Many other applications available call for best prices (below Vauxall astra brace my price £48.55)
http://demo.justwebs.co.uk/ShopPics/RUK/TRR_O_101.jpg

[jimmy]

http://www.grounddesigns2000.com/04-customerrides/04-guillermo/04sm.jpg
http://www.grounddesigns2000.com/04-customerrides/13-fernandotimbas/02sm.jpg
Honda Civic Ground designs Streetfighter II body kits available , rare and genuine call for the best prices
--------------------------------------------------------------------------
XENON chyrsler neon Body kit priced at £525.50 inc VAT would cost nearer to £1000 to buy and import.Comes with mesh. front bumper shown in pic.
http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=38815
Made of a material known to be able to withstand most impacts and return to its previous shape not like cheaper fibreglass items. Imported from USA complete kit includes front and rear bumper and both skirts , other pictures of this kit also available.
Also other Xenon body kits for the Honda civic 1992-95 ( priced £525 inc VAT)and 1990-00 coupe shape ( priced £425.55 inc. VAT )as well as Ground designs imported streetfighterII (price to be confirmed on enquiring) and black widow body kits ( priced £525.50 inc. VAT ).
below are pics of pics of the Black widow and ground effects styling parts
http://www.octanemotorsports.com/bw1_civic2dr_96_00_kit1.jpghttp://www.octanemotorsports.com/bw1_civic2dr_96_00_kit3.jpg[/IMG]
http://www.octanemotorsports.com/bw2_civic2dr_96_00_kit10.jpg
As you can see these pics are of excellent quality.
http://www.grounddesigns2000.com/04-customerrides/03-stacyvilleroel/01sm.jpg
http://www.grounddesigns2000.com/04-customerrides/51-jeremyjones/02sm.jpg

[jimmy]

http://www.octanemotorsports.com/bc_civic_96_00_kit4.jpg
Lexus style rear lights available for many cars, call for prices.

http://www.quikshiftracing.co.uk/Images/Products/FC1%2B.jpg
Fuel cap trims made from polished aluminium, anodised and chemically brightened to give a superior finish. All caps use stainless steel bolts. Fitting kits and instructions included.
http://www.quikshiftracing.co.uk/Images/Products/ss%20fuel%20cap.jpg
Silver, Red, Blue, Black and Titanium finishes are available
Prices start at less than £20!!! One peice Stainless steel caps also available.Call for best prices.
http://www.quikshiftracing.co.uk/Images/Gallery/Saxocap.jpg
we can also supply chequer plate foot wells for a varity of cars as well as aero style fuel cap trims made from polished aluminium, anodised and chemically brightened to give a superior finish. All caps use stainless steel bolts. Fitting kits and instructions included.
Silver, Red, Blue, Black and Titanium finishes are available
http://www.quikshiftracing.co.uk/Images/Gallery/2002.2.jpg
http://www.quikshiftracing.co.uk/Images/Products/Footwell.jpg
Vauxall Calibra rear LED quad lights now available!
http://www.quadconversions.com/images/Calibra_pics/Calibra_web.jpg
The lights come with a wiring kit which means the lock on the boot isnt in place any more and the boot is now opened by a button inside the car giving improved security as well as looks.£280.50!!!!
-------------------------------------------------------------
Suspension and lowering spring kits available for a variety of cars examples:-
1.8 turbo nissan 200SX lowered by 35mm =£70.25 (spring kit)
Pugeot 106 GTi full suspension kit =£144.25
Escort RS turbo lowered by 20mm =£45 (spring kit) or full suspension kit £145E36 BMW 318iS lowered by 40mmm = £160.75 ( full suspension kit)
Citreon saxo VTS /VTI / VTR lowered by 55mm = £ 134.45 (full suspension kit)
http://www.racelanduk.com/Images/top_2.gif
Honda civic 1.4/1.6 EXC vtec & 5 DR , lowering springs = £56.55
Vauxall Nova SR/GTE/ GSi lowered by 40mm = £49.25 ( springs) or £129.99 (full suspension kit)
Plus many many more applications available call us for details . -07768100219

[jimmy]

To suit Nissan Almera GTi or the Sunny/Pulsar GTi-R.

Hi-spec big disc / 4 pot conversion.
=======================
http://www.hispecmotorsport.co.uk/Billet4Kitweb_small.jpg
The Billet 4 Kit
http://www.hispecmotorsport.co.uk/images/EBC_logo_small.jpg
One Pair of Discs, Cross-drilled or Grooved One Pair of Aluminium Mounting Bells*
One Pair of Aluminium Mounting Bells
One Pair of HiSpec Billet 4 Calipers
One Pair of Mounting Brackets
Hardware Pack

If wanted i can supply EBC greenstuff pads to suit for £36 inc VAT!!!
Total price inc pads is then just £435.55 inc VAT!!! or just £399.50 with out the pads!For an extra £29 i can offer braided brake hoses to compliment any of the Hi-Spec big brake upgrades and we can upgrade further still by making the disc a combination of both x-drilled and grooved for just £39.20 extra
_________________

===============

Call 07768100219 or PM me for further details or to order.

BRAKE FLUID.
=========
DOT 5.1 'Non Silicone Based' Fluid.
- Exceeds F.M.V.S.S No116 DOT 5.1 spec. and current spec. S.A.E. J1703
- Typical Dry Boiling Point 271°c - Typical Wet Boiling Point 184°c
- ABS Compatible
This is a great fluid for normal and fast street use. We recommend changing of brake
fluid at least once a year! Brake fluid will degrade through absorption of water in a
surprisingly short period of time, and it is worth noting that the wet boiling temperature
of a top grade race brake fluid is lower than the dry boiling temperature of even the
most average road going brake fluid - when was yours last changed?
£12 A LITRE



BREMBO BIG BRAKE KIT-The fitting of larger diameter discs in conjunction with larger
calipers provides an increased mechanical advantage along with the benefits of a greater pad friction area.
In short - better brakes.


http://www.3gbrakes.co.uk/images/big_disc_conversion_photo.jpgThe basis for these kits is the same no matter what the car; A high performance cast iron vented rotor attached to an aluminium bell & custom designed brackets to allow re-mounting of the caliper.
• Huge increase in braking power!
• Aerospace quality billet machined aluminum bells / brackets.
• Full fitting kit provided - no workshop facilities required.
• Designed with popular alloy wheels in mind - no conflicts!

Please note -The kit shown is not the Almera GTi/Sunny GTi-R kit, this kit for these cars has a one peice disc instead of a seperate bell and also the kit includes purpose made Bremo 4-pot calipres , the disc still features the grooves as shown in the pic however and is 306-310mm diametre. This kit gives exceptional braking to your Almera / sunny!

Cost for 300ZX /200SX is £459 (RRP is £495)
Cost for the Almera GTi / Sunny GTi-R is £685.50 (RRP is £745) the extra expense is due to the Brembo 4 pot calipres.Some other applications also available .
Please contact us (07768100219) for details on your requirments

OUR RANGE OF BRAKE PADS.
EBC brakes are produced in a modern ISO 9002 conforming factory in England. The EBC programme
ranges from "Type Approved" OEM replacement brake pads to upgrade Roadsport pads and full
competition formulations offering a perfect selection for every type of brake pad requirement and
type of motor vehicle.
http://www.3gbrakes.co.uk/images/ebc_black.jpg
STANDARD BLACK RANGE
- Fine for general street use.
- Cheaper in many instances than manufactureres original part.
- Good progressive 'bite' and feel.

http://www.3gbrakes.co.uk/images/ebc_green.jpg
GREENSTUFF
- Fast street and light race applications.
- Upgrades brake performance, friction co-efficient of 0.46.
- Excellent initial bite, no warming up required.
- Heat stable up to 550°c.http://i12.ebayimg.com/02/i/01/0f/17/0c_0.JPG
- Low disc abrasion due to Kevlar content, kind to discs.
- Low dust formula, great for your alloys!
http://www.3gbrakes.co.uk/images/ebc_red.jpg
REDSTUFF
- Excellent Race and Rally use, medium lifetime.
- Great choice for heavier & more powerful road cars e.g
Imprezza's, Evo's, M3 & M5, 300zx etc.
- Friction co-efficient of 0.3 - 0.4 up to 750°c.
- Very kind to discs.
- Medium initial bite with friction steadily increasing with temp.
http://www.3gbrakes.co.uk/images/ebc_yellow.jpg
YELLOWSTUFF
- Medium to long lifetime Race and Rally pad.
- Friction co-efficient of 0.34 - 0.42 up to 900°c.
- Kind to brake discs.
http://www.3gbrakes.co.uk/images/ebc_blue.jpg

BLUESTUFF
- Endurance Race pad.
- 2 - 3 times the life of the Yellowstuff.
- Friction co-efficient of 0.4 up to 900°c.
- Kind to brake discs.

http://www.3gbrakes.co.uk/images/Mintex_logo_button.jpg
Mintex have been involved with the manufacture of brake pads and friction materials for nearly
70 years. It is from motorsport that the latest family of performance pad materials have been
developed. Known as C-Tech, these materials cover a whole spectrum of vehicles from a typical
hot hatch for street use through to 700bhp tarmac eaters! The three available compounds are listed
below.
http://www.3gbrakes.co.uk/images/mintexpads_faded.jpg
MINTEX C1144 PADS
-This is the material for fast road use as well as light competition.
Works excellently from cold and remains stable and consistent through to
450°c where a standard material at this temp. will most certainly start to
fade. The bedding in procedure is the same as any standard pad material,
steady braking for the first 50 miles whilst avoiding emergency stops.
MINTEX c1155 pads-
This is a compound designed purely for competition use and under
no circumstances should be used for normal road applications. Best suited to
cars such as Group A / N rally cars, and circuit saloons, this material has a
similar friction level to the M1144 compound but remains consistent to a max
operating temperature of 550°c - 600°c. Like M1144, M1155 has no special
bedding in procedures.
MINTEX C1166 PADS-
Again, this is a compound designed purely for competition use and
is suitable for rally and salloon / sports car endurance racing. The friction level
is higher than that of the M1155 and remains consistent to temperatures of
700°c. No special bedding in procedure is required.

Call for best prices

http://www.3gbrakes.co.uk/images/pagid%20logo.gif
Pagid manufacture top quality pads in their modern German factories. They are OEM
equipment on some Ferraris and have seen considerable successes on the race scene, e.g.
WRC rally cars, Nascar.



Pagid Fast Road pads are available for many applications. These are superior quality pads at a reasonable
price.


A high performance compound with good fading characteristics and high cold friction. The most comfortable
medium friction sport compound. It is road legal and disc friendly.


The most popular pagid race compound used by many Impreza and EVO owners both for fast road and
track day use. A medium friction racing compound with good cold friction and fading resistance up to
500°c. The 4-2 compound has a reasonable disc wear rate. It has very good modulation
(adjustment) and is also used for small open wheeled race cars; F3, Formula Renault and club racing.


This compound has a very good fade resistance and a high average friction value than the RS 4-2. It is
disc friendly with a very foreseeable non-aggresive friction behavior (stable torque). It is a very good rear
compound for Touring Car applications in combination with RS 14 front pads. It's main application is
Porsche 911 racing.


This is a low friction rear axle racing compound especially developed for front wheel driven cars.


This is a high friction value ceramic compound with very good modulation, high fade resistance, low heat
conductivity and good wear rate up to a constant temperature of 650°c.


The RS15 is based on the the already proven Ceratec (tm) material which has a 20% higher friction value
than the RS 14. It has a very good pad life, and a remarkable quick release ability characteristic. Although
the RS 15 has a very good modulation, it may have an excessive bite for some applications.


Best compound for endurance racing on the basis of the RS14. A slight reduction of the value imroves the
modulation. Nevertheless, the friction value is enough for cars without power-assisted brake systems and
ensures comfortable low effort on the brake pedal. Constant temperatures up to 600°c (1100°f) are possible.

phone 07768100219 with questions or to place an order.

[jimmy]

http://www.magnecor.co.uk/assets/mag_spark.gif
Underground Race UK is now supplying Magnecor Uprated HT leads at below RRP prices , examples include,,, Designed for racing engines using racing ignitions, supercharging and exotic fuels. Extra large 10mm jacket made from aerospace extreme heat-resistant silicone rubber to provide additional heat protection and insulation. Exclusive Magnecor 2.5mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely. Can be used on street vehicles if space allows.

http://www.magnecor.co.uk/assets/10.jpg Original equipment replacement. Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors. Ideal for LPG gas conversion engines. Excellent RFI and EMI suppression. Flexible high-strength all silicone construction will allow cable to fit into original 7mm lead holders. http://www.magnecor.co.uk/assets/8mmel.jpg Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI and EMI suppression. Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. Extra strong EVA outer jacket for better terminal retention, EPDM insulation.
http://www.magnecor.co.uk/assets/7mmel.jpg All priced cheaper than usual RRP-call 07768100219 for details

Light wieght flywheels.Underground Race UK has now made contacts with an importer of Findanza products which allows us the chance to sell these fine products at great prices we can supply almost any flywheel in their range however here we are mainly interested in the fly wheel for the SR20de engine(nissan of course) This fly wheel can free up to 25bhp and allow that power to be used at the wheels of your car. If ordered in groups of 5 then i can offer this fly wheel application for just £284 each plus £9.99 each delivery!!!.
Aluminum flywheels have been used for many years for increasing performance. From the earliest days of racing and street build-ups, the world's best engine builders have been installing aluminum flywheels to give their engines the needed edge.
http://www.aluminumflywheels.com/imgs/3_color_flywheels_s.jpg
Not only will you see a dramatic increase in usable horsepower, but engine life can also be extended since there will be less stress on the crankshaft.
http://www.aluminumflywheels.com/imgs/All_kinds_of_flywheels_s.jpg
How Does A Fidanza Flywheel Give Me So Much Added Power?

To achieve the greatest increase in performance an aluminum flywheel must lower the moment of inertia characteristics of the engine. Put in simpler terms, we must reduce the amount of horsepower needed to turn the flywheel so that horsepower can be used to turn the wheels.
http://www.aluminumflywheels.com/imgs/Flywheel_Front_s.gif
Making the flywheel lighter is not as simple as it sounds. Anyone can take the factory design and then just produce that from aluminum. At Fidanza Flywheels we take the extra effort to eliminate the weight in areas that make sense for performance.

We do not sacrifice durability. We will not sell a flywheel that will not hold up to the roughest of drivers and or engines. This is where Fidanza Flywheels have the edge. Our flywheels give the best increase in performance but they are also the most durable. What a concept!

Anyone can claim to make a product that far exceeds industry standards but we choose to put our money where our mouth is.

From the very best materials to ground breaking new designs, Fidanza Flywheels are the finest aluminum flywheels on the market.

Please allow us a moment to introduce you to the most exciting product line to hit the automotive aftermarket in many years.

Let's Talk Quality

Fidanza Flywheels are made using the highest quality and most modern materials available.

The flywheel itself is made from either 6061 T6 or 2024 T3 aluminum depending on the model. Both of these materials are tempered aluminum which are very, very strong yet very lightweight.

The friction surface is very special. We use a 1050 high carbon, alloy steel. This alloy is perfect for this use. It is incredibly durable allowing the use of just about any clutch disc material available from organic to Kevlar and even sintered iron.

We attach the friction surface using aerospace nuts and bolts or 304 stainless steel rivets depending on the application. These are some of the best fasteners money can buy. We chose them because of their incredible shear strength and resistance to corrosion.

All of our ring gears are heat treated for durability. They are heated, pressed on and then secured using grade 10 fasteners.
http://www.aluminumflywheels.com/imgs/Miata_flywheels_s.jpg
You will not find better materials but keep reading because our machining and design process will knock your socks off.

Most companies design their flywheels so that they can be machined quickly and with the least amount of effort.

At Fidanza Flywheels we design our flywheels to produce the best increase in performance and the most durability.

Sometimes that means sacrificing a little profit on our end but we think you and your customers will agree, it's well worth it.

How Does Fidanza Flywheels Do That?

Fidanza Flywheels are machined and designed to be the very best flywheel on the market.

All of our flywheels are CNC machined. This process gives them the most accurate dimensions and the best possible finish. We use the very latest techniques to ensure that our flywheels are innovative and functional.

Our friction surface is laser cut with the fastener holes and chamfers CNC machined. The pattern for the fasteners is a computer design that keeps the friction surface from warping. We don't just use more fasteners because we can, we use them because they are needed.

Our designs can only be described with one word - AMAZING !
For further sale dedtails call 07768100219 all above info from the Findanza official website.

[jimmy]

http://www.quikshiftracing.co.uk/Images/Products/TAIPAN.jpgThe TAIPAN ,
The Quikshift Racing Taipan intake systems have been designed to give the ultimate in air induction technology. Cold air fed directly from the front of the vehicle is channelled into a genuine carbon fibre chamber encased with polished aluminium end plates. The cold air is drawn into the unique inverted stainless steel filter maximising airflow. The Taipan has the capabilities to unleash real power gains whilst retaining a distinctive induction note.

Taipan 1 has a 100mm open bell mouth front cap. Taipan 2 comes complete with cold air feed
Taipan collar sizes - 60, 70, 75, 80 & 85mm
Prices vary however the Taipan kit is generally available for an RRP price of £ 169 inc VAT My price is £153 inc VAT!!!!!!!
http://www.quikshiftracing.co.uk/Images/Products/Taipan%201.jpg
Easier to fit than a vent bonded to the OE bonnet with a neater finish and no where near as likely to crack and sink this complete bonnet skin bonds over the OE bonnet (or can be adapted by a good body shop to replace it ( for light wieght)
http://www.quadconversions.com/images/Astra/astrabonnetjpg.jpg
comes with mesh to fit the mk 3 astra range. similar full bonnet skin with Sabre vent available for the ford Ka and Nova.

http://www.quadconversions.com/LEXUS_LIGHTS/Ford/F061L67BLK.jpg

clear or smoked E marked rear lights to fit MK1/2 ford fiesta's £48 a pair inc VAT!!!
http://quadconversions.com/images/Renault_pics/Renault_19_small.jpg
Renault 19 styling parts now available call for further details.

The Underground Race UK 'Cram air 'CAI kit.
After 7 months design and development its finished
available for 1.6 N15 Nissan Almera and Nissan 100NX .
potentially adds 10BHP (educated estamiates) and great underbonnet looks (fully mirror polished including supporting arm and filter).It comes complete with two lenghts of light wieght flexiable aluminium cold air ducting and bolts for fitting (polished), its filter element is a Quikshift made stainless steel high flow mesh one with mirror polished caps at each end. It connects to the trottl body using the OE rubber sleeve . Compare prices to a similar import from Japan or USA .
http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=39821
http://www.cruisenorthwales.com/forum/inde...e=post&id=39821

Priced £164 inc VAT (post and packaging is extra)

http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=39928http://www.cruisenorthwales.com/forum/inde...e=post&id=39928
http://www.cruisenorthwales.com/forum/inde...e=post&id=39929 (http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=39929)

Please note these are hand made and hand polished to order and theres a waiting list further orders not being taken for a further 2 weeks as of today.

Ford fiesta mk3/4 Cosworth style front bumper
£125 please phone 07768100219

Ford Sierra Cosworth spiolers sapphire or 3dr style ones availble
http://www.cruisenorthwales.com/forum/inde...e=post&id=39926 (http://www.cruisenorthwales.com/forum/index.php?act=Attach&type=post&id=39926)
Also available new XR/RS and cosworth style kits please phone 07768100219 for prices (example-Ford escort cosworth kit RRP-£695 inc VAT My price -£665.55 inc VAT!!!!!!)

[jimmy]

LED rear lights for the Puegeot 206cc, RRP £265 plus VAT and delivery charge my price is just £246.25!!!!! delivery £9.50 in UK mainland on this product.


http://demo.justwebs.co.uk/ShopPics/RUK/TRL_INCK.jpg
92-99 civic induction kits -£144.75 available in Carbon fibre , Kevlar and /or stainless steel. (RRP IS £169)

http://demo.justwebs.co.uk/ShopPics/RUK/THO_CAPS.jpg
replacment aluminium oil caps for sale priced £22!!!!!!


Now available range of new Saxo mk II body kits including wide arches and a chioce of full replacment fibreglass bonnets.

http://images2.fotki.com/v20/photos/4/4294...beast003-vi.jpg (http://images2.fotki.com/v20/photos/4/42941/161044/beast003-vi.jpg)

Above shud work now!?

http://images3.fotki.com/v30/photos/4/4294...green014-vi.jpg
http://images3.fotki.com/v30/photos/4/4294...green014-vi.jpg


these (above pics) are the jap style spioler i can do for the Saxo mk 2 (probobly also fit the mk 1 saxo as well as a few other small hatchbacks) its an adjustable spioler and its RRP is £155 inc all the brackets etc needed to fit .
I can sell this spioler at £150 iinc VAT and hope to soon be able to supply it cheaper still.

This is (BELOW )the TC 3 spioler and is RRP of £80 plus P&P i sell them at £78.50 inc VAT
http://www.photobucket.com/albums/0903/ren...ie/a951ad29.jpg (http://www.photobucket.com/albums/0903/rennie/a951ad29.jpg)


This pic (above ) also shows the delta 1 rear bumper for the fiesta mk 3 (available for a host of other cars), the delta 1 one bumperis priced RRP of £260 i can supply it to you for £255.50 inc VAT.

http://www.photobucket.com/albums/0903/ren...ie/02d22e76.jpg (http://www.photobucket.com/albums/0903/rennie/02d22e76.jpg)

This pic shows The TC 5 spioler and has an RRP of £150 i can supply you with it for £146.55 .
All these spiolers come primered ready to paint.

Call 07768100219


http://www.quadconversions.com/images/Saxo_pics/Saxo_clear.jpg
Saxo rear lights also available after burner lights for many other makes and models call for prices and further details .

http://demo.justwebs.co.uk/ShopPics/RUK/RA_ALTZ_CRX.jpg
Honda CRX rear lights also available for the honda accord coupe ( see below pic). Ones shown in pic cost RRP £170.40 my price just £162.50 inc VAT!!
http://demo.justwebs.co.uk/ShopPics/RUK/TRA_ALTZ_ACC.jpg

Mk 1 Nova twin headlamp conversion available includes a new one peice surround/grille with mesh -£255 =my price (Usual RRP = £265)As reviewed in MAX power
http://www.quadconversions.com/images/maxp/viper_bumper.jpg
RRP £195 my price £189.95 , Inc the clear indicators!!!
http://www.quadconversions.com/images/Nova_pics/blue_nova_front2.jpg
Its made of easy to paint ABS able to withstand knocks and bumps much better than fibreglass bumpers and its available to fit mk 1/2 Novas as well as the MK 4 Escort.

E36 BMW lexus style rear lights -£162!!!

http://demo.justwebs.co.uk/ShopPics/RUK/RL_GRILL_11.jpg
Bad boy effect grille and eyebrow unit for mk 3 golf.Comes complete with mesh . RRP=£65, MY PRICE =£62
http://demo.justwebs.co.uk/ShopPics/RUK/TRL_SS.jpg
Get this great look with these mesh side skirts. Available for the Carrado only. VW Corrado side skirts RRP=£100 my price is just £94.95

Golf rear lights , call for details -cheapest prices around-07768100219

http://demo.justwebs.co.uk/ShopPics/RUK/RO_63_0428.jpg
Universal back box with 62mm inlet and 100mm tailpipe , CARBON FIBRE !!!
RRP=£119 MY PRICE IS £112.25!!!!
ALSO MANY OTHER STYLES OF BACK BOX and tail pipes AVAILABLE IN UNIVERSAL FITMENT CALL FOR DETAILS , prices start at just £20!!!!!!!

[jimmy]

http://www.quadconversions.com/images/Honda/Buttons/CRX%20Rear%20Bumper.jpg
Honda CRX rear bumper , full kit available inc after burner or lexus style rear lights and quad headlamps. http://www.quadconversions.com/images/Honda/Buttons/CRX%20Rear%20Bumper.jpg
Honda CRX rear bumper , full kit available inc after burner or lexus style rear lights and quad headlamps.
http://www.quadconversions.com/images/CRX_pics/Honda-crx_2.jpg
http://www.quadconversions.com/images/CRX_pics/front_black_background.jpg
Bad boyed look projector headlamps for the Honda CRX coupe call for best prices also this kit available .Call for best prices around!!!

[jimmy]

M3 style wing mirrors for the Ford Ka
http://www.quadconversions.com/images/ford_pics/KA/ford_ka_Mirror.jpg
A perfect fit for the Ka , call for latest and cheapest prices-07768100219

Quadconversion front bumper kit for the Ford mondeo ,,
http://www.quadconversions.com/images/ford_pics/mondeo_info.jpg
RRP £265 -my price £254.90

[jimmy]

To fit the MK 1/2 Nova
http://www.quadconversions.com/images/Nova_pics/speaker_pods.jpg
Improved easy to fit design able to take up to 6 1/4 inch speakers and tweeters at same time!!
RRP=£98.50
my price=£92

http://quadconversions.com/images/Renault_pics/Clio.jpg
Renault clio mk 1 and facelift version (with a slight mod)
RRP=£289
MY PRICE=£274.95
http://japkits.com/images/Dooby3.jpg

This shows the front lip spioler i can supply for either the Subaru Impreza ,or the N15 shape Nissan Almera. it comes primered ready to paint and is made of fibreglasss my price is £96.25 including VAT.

Also this pic shows the impreza 22B upgrade spioler which i can supply for £149.50 inc VAT (normal RRP is £160) these are a universal fitting part and again come primered.


After burner L.E.D. rear lights and quad style front headlamps now available for the ford Ka, call for the cheapest price around.:-
http://www.photobucket.com/albums/1003/john2184/MVC-005S.JPG
http://www.photobucket.com/albums/1003/john2184/MVC-006S.JPG
call 07768100219

Escort RS Cosworth upper and lower spiolers for sale cheapest prices around all new stock comes primered.
http://www.wrc-cosworth.org/pics/pics14/cossie2_LS.jpg
call for details on 07768100219

[jimmy]

Honda civic kit to fit the coupe or the saloon .
http://www.abstyling.co.uk/bodykits/images/honda/civic92saloon_1.jpg

Call me for best prices , the kit shown is the MS designs kit i have various others available.07768100219Clear / Lexus tyle rear light clusters available for a variety of make/models shown for example are impreza WRX lexus style http://japkits.com/images/Dooby1.jpg
http://www.streetrace.co.uk/images/UGUKBanner.gif

[jimmy]

http://www.racelanduk.com/ALN/Images/RUK_1_1.jpg
VW Golf double DTM exhaust back box (as shown below) and VW golf lexus style rear lights , badgeless grille rear splitter , Blast 2 back box and -40 mm lowering springs .(as shown above) . Available NOW! best prices around call 07768100219
http://www.racelanduk.com/ALN/Images/RUK_1_2.jpg

http://www.racelanduk.com/Images/top_1.gif
Many styles of seats available from sports recliners to buckets, style shown in pic above cost £75.75, available in a host of colours style shown below cost £182.55
http://www.racelanduk.com/Images/Shop_front/seats.jpg
http://demo.justwebs.co.uk/ShopPics/RUK/RL_FB_0524.jpgMONSTERFACE" Front Bumper Golf MK3
The Monsterface front bumper is a serious bumper.Comes with mesh.This bumper would give any Golf MK3 the Mean Look. £224.95 inc VAT

http://demo.justwebs.co.uk/ShopPics/RUK/RL_FB_0512.jpg
VW polo front bumper, comes with mesh.£220.25 inc VAT

[jimmy]

http://demo.justwebs.co.uk/ShopPics/RUK/TRS_GOLF_IV.jpg
VW Golf MK4 Sport Grill Badgeless
Badgeless front grill 2 slat. £49 inc VAThttp://demo.justwebs.co.uk/ShopPics/RUK/RO_001_T.jpg
Blast XI Exhaust
Universal back box exhaust, with 90mm tip and 62mm inlet pipe. Total length = 420mm
Tip Width = 90mm
Inlet pipe width = 62mm ,You can adjust the amount of noise you want from this back box. Very simple adjustment.
cost = £128.95

http://demo.justwebs.co.uk/ShopPics/RUK/RO_SM106S.jpgBlast VI Exhaust
Universal back box exhaust, with 103mm tip and 62mm inlet pipe.
£112.99 inc VAT

http://demo.justwebs.co.uk/ShopPics/RUK/RO_63_0513.jpg
Blast V Exhaust
Universal back box exhaust, with 115mm tip and 62mm inlet pipe.
cost= £114 inc VAT

==============================================

http://demo.justwebs.co.uk/ShopPics/RUK/RE_206.jpg
Peugeot 206 Roll over bar
Chromed `Sporty Look`.
cost=£115 inc VAT

[jimmy]

Strut Brace Fiat Punto 93 - 99
Upper front strut brace for the Fiat Punto 93 - 99. £50.55Clear and smoked universal fit side repeator lights from just £6.55 a pair.
http://demo.justwebs.co.uk/ShopPics/RUK/TRO_UNIV_3.jpgBlast 3 Exhaust
Universal fit stainless exhaust, Highly Polished
£114. inc VAT

http://demo.justwebs.co.uk/ShopPics/RUK/TRO_P1.jpg
P1 Exhaust Tip
Stainless steel universal exhaust tips with rolled end, with or without sound absorber. 350mm long.£30

http://demo.justwebs.co.uk/ShopPics/RUK/TRO_P2.jpg
P2 Exhaust Tip
Stainless steel universal exhaust tips with rolled end, with or without sound absorber. 340mm long.£30.55

http://demo.justwebs.co.uk/ShopPics/RUK/TRO_P4.jpg
P4 Exhaust Tip
Same shape as P2 but has straight cut end instead of rolled end. Comes without sound absorber. 340mm long.£22
http://demo.justwebs.co.uk/ShopPics/RUK/RO_P6_90.jpg
P6 Exhaust Tip 90mm
Stainless steel universal round exhaust tip, straight cut without absorber. 90mm wide and 300mm long.£20


http://demo.justwebs.co.uk/ShopPics/RUK/RO_P10_MK3.jpg
Double DTM Exhaust Golf MK3
Steel box with stainless steel tips. Sporty sound and looks, 3 year warranty.

Doesn`t fit the VR6 or 1.4 Golf MK3 without some modification.
£159.75 inc VAT

[jimmy]

http://www.cruisenorthwales.com/forum/uploads/post-4-1068667887.jpgThe above pic shows Toyo proxes T1-S tyres size 195/50/15 . Set of four £145. The pic also shows a mirror polished centre box ( exhaust section) and tail pipe with inward rolled tip , with sound deadening. The centre box features rifling effect which helps draw the fumes out of the system. The exhausrt parts are imported from the USA .Call for details.

[jimmy]

extremely rare,,,

http://www.quadconversions.com/images/Mazda/mazda.jpgvery exclusive rear lights for Mazda MX coupe, call for details.
http://www.100nx.com/Forum/uploads/post-31-1071597039.jpg
Ive only the one in stock its real leather with a D shaped to it horn push and all fittings included. £65.55
http://www.100nx.com/Forum/uploads/post-31-1071596974.jpg
Itll fit most Nissans.
http://www.100nx.com/Forum/uploads/post-31-1071508627.jpg

[jimmy]

http://www.batmotorsport.co.uk/thumbs/nova_rear.jpg
Clear rear Nova lights now available call for details.
RRP of £105 I will sell them for just £98.75 a pair inc VAT

Our latest product is Mk1 Fiesta clear indicator units.

Priced at £50.00 per pair these units are a limited production
http://www.visualdeliveryhosts.com/fiesta-world-u-k/images/fly3.jpg
Suitable for any Mk1 model (excluding XR2 or Federal spec cars) these can be used to modernise the appearance of your Mk1, or simply just replace your tired amber OE lights.
http://www.visualdeliveryhosts.com/fiesta-world-u-k/images/fiesta-mk1-clears.jpghttp://www.carltonauto.co.uk/ford/DELTA%202%20001.JPG
This front bumper is available for most core modifiers cars, our prices start and finish at below RRP , call for the best prices and details of fitments.
Available to fit most car makes and models, £192 inc VAT !!! per pair (RRP - £200)
http://www.carltonauto.co.uk/ford/Delta%202%2003.JPG

below is the MK4 ford escort delta 1 rear bumper , priced £265.55 inc VAT (RRPis £285)
http://www.carltonauto.co.uk/ford/escort_mk4/esc_mk4_delta_rear.htm
Full BMW m tech style kit
http://www.carltonauto.co.uk/graphics/page_graphics/bmw2.jpg
FULL KIT : front & rear bumpers + side skirts= £529.50 inc VAT!!!
http://www.carltonauto.co.uk/graphics/page_graphics/bmw1.jpg
BMW E30 M3
E30 M3 kit Including : Front bumper, rear bumper, side skirts, front wings and rear wings

[jimmy]

http://www.carltonauto.co.uk/graphics/page_graphics/spoiler_honda.jpg
now available , when ordering please ask about the green honda spioler , however please note this spioler with fit various other makes and models.
http://www.carltonauto.co.uk/graphics/spoilers/11_jpg.jpg
Above Saxo OE style spioler-£59
http://www.carltonauto.co.uk/graphics/spoilers/14_jpg.jpg
Above , ideal for cosworth styled ford Orions this spioler will also fit a host of other cars. -£112.25
Also any other styling parts shown on the above pic of the Orion are also available at less than RRP prices!http://www.carltonauto.co.uk/ford/Fiesta%20Cos%20008.jpg
ford fiesta RS2000 style side skirts just £88.20 a pair also cosworth style fiesta rear bumper and the spioler shown in the below pic now available
http://www.carltonauto.co.uk/ford/Fiesta%20Cos%20005.jpg
the cosworth style rear bumper is £112.20 please call 07768100219 for details on the spioler .

[jimmy]

Expected at the end of January
http://www.roguesystems.co.uk/products/headlights/thumbs/01.jpg
Cost currently estimated at £300 - £350
Low Rise Quad Headlamp Conversion
http://www.roguesystems.co.uk/products/headlights/thumbs/03.jpg
===============================================Jap spec Alcantra and leather Toyota MR2 sports seats , used but in excellent condition-£249.55
http://www.roguesystems.co.uk/usedparts/interior.jpg
Std cloth trimmed Toyota MR2 sports style seats £182 pr pair . 2nd hand but in great condition.Also available (UK version) full leather toyota MR2 sports seats £282 the pair again 2nd hand but in great condition